Some equipment and supplies and health and safety functions should be provided to carry out minimal testing process and clay body preparation.<\/p>\n

Wire cutters<\/strong>
\nTo cut the plastic clay when pengulian. Size: 40 cm length of wire, stainless steel materials.<\/p>\n

Needle<\/strong>
\nTo signal and make a line on the tile. Size: a total length of 14 cm, 4 cm needle eye.<\/p>\n<\/div>\n

$\"clip_image002\"$ <\/a><\/div>\n
Cutting blades<\/strong>
\nTo cut a slab of plastic clay into tile. Size; total length of 17 cm, 8.5 cm blade.<\/div>\n
<\/div>\n
Slab roller or roll timber<\/strong>
\nTo make a clay slab of plastic. Size: length 50 cm and diameter 5.5 cm, material: wood brown.<\/div>\n
<\/div>\n
Ruler<\/strong>
\nTo measure the length and width of the tile and make a line penenda size before and after burned. Size: length 30 cm, material: metal or mica.<\/div>\n
<\/div>\n
Pestle<\/strong>
\nTo grind materials in the form of lumps of clay. This tool can be a hammer of wood. Size: length 32 cm, material: wood.<\/div>\n
<\/div>\n
Table casts<\/strong>
\nTo knead the clay to plastic so that all the elements that are evenly mixed (homogeneous) and reduces the water content. Pengulian table has a leaf table made from natural gypsum or wood can absorb water. Dimensions: length 100 cm, height 80 cm, and 60 cm wide.<\/div>\n
<\/div>\n
Measuring cup<\/strong>
\nTo measure the amount of water used in the process of mixing the clay material. Size: 1 liter volume.<\/div>\n
\u00a0 $\"clip_image008\"$ <\/a><\/span> \u00a0<\/span><\/span><\/div>\n
<\/div>\n
Scale<\/strong>
\nTo weigh the clay material
\ntakes the form of a dry powder. Capacity adjusted for the material to be processed. Size: Maximum capacity of 5 kg.<\/div>\n
<\/div>\n
Mortar and Pestle<\/strong>
\nTo grind dried clay that has been somewhat refined grains to be smooth. Size: diameter 20 cm, capacity of 2 liters, porcelain materials.<\/div>\n
<\/div>\n
Sieve<\/strong>
\nTo filter out the clay in wet or dry conditions, sieve mesh size used 50-80 usually made of wire \/ metal. The figure shows the sieve mesh size on the density or the number of holes in keluasaan one square inch (\u00b1 2.5 cm 2), so the larger the number the more holes sieve. Size: diameter 40 cm.<\/div>\n
\u00a0<\/span> $\"clip_image011\"$ <\/span><\/a> \u00a0<\/span><\/b><\/span><\/div>\n<\/div>\n
Plastic jars<\/strong>
\nTo store dried clay materials that have been filtered. Size: capacity of 1 gallon (5 liters), material: plastic.<\/div>\n
$\"clip_image012\"$ <\/a> \u00a0<\/span> $\"clip_image012[1]\"$ <\/span><\/a> \u00a0<\/span><\/span><\/div>\n
<\/div>\n
Plastic basin<\/strong>
\nTo make the place a mixture of plastic and clay tile soaking biscuits. Size: 3 kg capacity.<\/div>\n
<\/div>\n
Shovel<\/strong>
\nTo take the clay material. Material: metal \/ metal or plastic<\/div>\n
<\/div>\n
Bucket<\/strong>
\nIts function is to hold the soil to be processed and saves the land that has been processed. Size: 5 gallon capacity and 2 gallon.<\/div>\n
<\/div>\n
Pyrometric cone<\/strong>
\nTo detect the temperature in the combustion chamber achievement. The temperature stake can only be used once, after which the temperature corresponding code number is achieved, then the stakes will be curved or melt temperature and can not be used anymore.<\/div>\n
<\/div>\n
Thermocouple and pyrometer<\/strong>
\nTo measure the temperature of the burning tile. The instrument is made of two types of wire with both ends melted and incorporated, installed in the furnace combustion chamber to detect and distribute heat from the furnace to the indicator pyrometer to measure the temperature in the furnace. Maximum temperature of 1300 0 C.<\/div>\n
<\/div>\n
Furnace<\/strong>
\nTo burn tile used in the testing process clay. Size: combustion chamber 40 cm x 40 cm x 50 cm. Maximum temperature of 13000C.<\/div>\n
<\/div>\n
Blunger \/ Mixer<\/strong>
\nTo mix or stir the mixture and destroy the clay in wet conditions (slip). Size: capacity of 25 kg and 50kg.<\/div>\n
<\/div>\n
Pugmill<\/strong>
\nTo solidify the plastic clay as well as to eliminate air bubbles. Size: length 83 cm, width 35 cm, height 86.5 cm. Weight of 120 kg. Hole accessories: 6 mm, 10 mm, 13 mm.<\/div>\n
<\/div>\n
Filterpress<\/strong>
\nTo reduce the water content in the clay slip that into the plastic clay. This tool is equipped with a filter cloth of canvas, each is a pouch that can be penetrated clay slurry (slip). Dimensions: length 113 cm, width 59 cm, height 106 cm. plate size 33 cm x 33 cm 5 cm thick. Weight of 300 kg.<\/div>\n
$\"clip_image022\"$ <\/span><\/a> \u00a0<\/span><\/span><\/div>\n
<\/div>\n
Ballmill<\/strong>
\nTo smooth the clay, the tool is equipped with porcelain balls are useful for grinding material inside ballmill to become the grains are smooth and easy to be filtered. Size: capacity of 50 kg. Ballmill size diameter 61 cm, length 84 cm. Dimensions Overall length 150 cm, width 68 cm, and 130 cm tall.<\/div>\n
<\/div>\n
Vibrator<\/strong>
\nTo filter out the clay in wet and dry conditions, vibrators are vibrating screening tool.<\/div>\n
<\/div>\n
Large bucket (container)<\/strong><\/div>\nTo soak the clay to be processed and saves the processed clay in liquid form (slip). Size: capacity of 100 kg.<\/div>\n
<\/div>\n
Scale<\/strong>
\nTo weigh the soil material that is used in a mixture of clay or formula. Size: capacity 200 kg<\/div>\n
\u00a0 $\"clip_image026\"$ <\/a><\/span> \u00a0<\/span><\/span><\/div>\n
<\/div>\n
Viscometer<\/strong>
\nTo mark the size of the viscosity \/ consistency masses slip.<\/div>\n
\u00a0<\/span><\/span> $\"clip_image027\"$ <\/a><\/div>\n","protected":false},"excerpt":{"rendered":"
Some equipment and supplies and health and safety functions should be provided to carry out minimal testing process and clay body preparation. Wire cutters To cut the plastic clay when pengulian. Size: 40 cm length of wire, stainless steel materials. Needle To signal and make a line on the tile. Size: a total length of …<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[63],"tags":[4252,4243,4244,4247,4245,4249,4248,4251,4246,4250],"class_list":["post-2012","post","type-post","status-publish","format-standard","hentry","category-clay-body","tag-clayville-testing-station","tag-testing-clay","tag-testing-clay-bodies","tag-testing-clay-bricks","tag-testing-clay-content-soil","tag-testing-clay-for-cob","tag-testing-clay-for-pottery","tag-testing-clay-roof-tiles","tag-testing-clay-soil","tag-testing-clay-soil-drainage"],"_links":{"self":[{"href":"https:\/\/www.tneutron.net\/blogs\/wp-json\/wp\/v2\/posts\/2012","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.tneutron.net\/blogs\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.tneutron.net\/blogs\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.tneutron.net\/blogs\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.tneutron.net\/blogs\/wp-json\/wp\/v2\/comments?post=2012"}],"version-history":[{"count":1,"href":"https:\/\/www.tneutron.net\/blogs\/wp-json\/wp\/v2\/posts\/2012\/revisions"}],"predecessor-version":[{"id":9066,"href":"https:\/\/www.tneutron.net\/blogs\/wp-json\/wp\/v2\/posts\/2012\/revisions\/9066"}],"wp:attachment":[{"href":"https:\/\/www.tneutron.net\/blogs\/wp-json\/wp\/v2\/media?parent=2012"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.tneutron.net\/blogs\/wp-json\/wp\/v2\/categories?post=2012"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.tneutron.net\/blogs\/wp-json\/wp\/v2\/tags?post=2012"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}