Figure 3.88 Installation of hydraulic hose<\/p>\n

4. Avoid friction. Hose clamps or gloves should be located free of sharp areas that move. If this is not possible, to use protection hose made \u200b\u200bof spring wire or plate gloves.<\/p>\n

5. Maybe dad hot. Laying the hose away from the surfaces (areas) are as hot as the engine manifold. If this is not possible then the hoses should be protected by using
\ncertain materials so that heat does not terkonduksi into the hose.<\/p>\n

6. Installation of hydraulic hose In sharp bends should be avoided. Radius hose bends depending on the construction, size and pressure. Usually manufacturing plants have \u00a0 recommends certain limits for each hose bends.<\/p>\n

At lower pressures, allowable bend sharper. If the hose re-laying may be taken to avoid sharp bend-bend. Or give extra length but excess stiffness or maintained rounds. But keep in mind only the flexible hose, instead of connecting.<\/p><\/div>\n","protected":false},"excerpt":{"rendered":"

After studying the possibilities of damage that occurs in the hose will be discussed later under the hose fitting. Of course that would be fitted hose meets the requirements of various factors in a hydraulic system. There are at least six rules in the installation of hydraulic hose. 1. Voltage hose must be avoided. Although …<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[52],"tags":[8205,8211,8215,8212,8208,8213,8210,8206,8209,8214,8207],"class_list":["post-5218","post","type-post","status-publish","format-standard","hentry","category-prinsip-dasar-hidrolik","tag-hose-fitting","tag-hose-fitting-adapter","tag-hose-fitting-crimper","tag-hose-fitting-press","tag-hose-fitting-size","tag-hose-fitting-tool","tag-hose-fitting-types","tag-hose-fittings","tag-hose-fittings-etc","tag-hose-fittings-lowes","tag-hose-fittings-near-me"],"_links":{"self":[{"href":"https:\/\/www.tneutron.net\/blogs\/wp-json\/wp\/v2\/posts\/5218","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.tneutron.net\/blogs\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.tneutron.net\/blogs\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.tneutron.net\/blogs\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.tneutron.net\/blogs\/wp-json\/wp\/v2\/comments?post=5218"}],"version-history":[{"count":1,"href":"https:\/\/www.tneutron.net\/blogs\/wp-json\/wp\/v2\/posts\/5218\/revisions"}],"predecessor-version":[{"id":9494,"href":"https:\/\/www.tneutron.net\/blogs\/wp-json\/wp\/v2\/posts\/5218\/revisions\/9494"}],"wp:attachment":[{"href":"https:\/\/www.tneutron.net\/blogs\/wp-json\/wp\/v2\/media?parent=5218"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.tneutron.net\/blogs\/wp-json\/wp\/v2\/categories?post=5218"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.tneutron.net\/blogs\/wp-json\/wp\/v2\/tags?post=5218"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}