Before installing ceramic tile over a concrete floor base, there are some things that should diperhatiakn and done, namely to accurately calculate the required ceramic tiles. Draw a picture of the design patterns and lane floor mounting (horizontal, vertical or diagonal wide space) to help calculate in detail the needs of the ceramics (exaggerating about 5% for the supply, installation time when there is a damaged plug, and a backup if there is damage in the future, due to restricted stock and miraculous time interval may not be produced anymore). And make sure the ceramic tiles that come in and be installed according to code, the size of the color ordered.<\/p>\n
a. Soak ceramic in water.<\/strong> b. Spread cement water.<\/strong> c. Mortar and concrete sub-floor surface must be completely clean.<\/strong> d. condense evenly.<\/strong> e. recently installed ceramic Nat.<\/strong> f. Do not be trampled.<\/strong> g. Check the installation results.<\/strong> 2) Using a wooden board<\/strong> Before installing ceramic tile over a concrete floor base, there are some things that should diperhatiakn and done, namely to accurately calculate the required ceramic tiles. Draw a picture of the design patterns and lane floor mounting (horizontal, vertical or diagonal wide space) to help calculate in detail the needs of the ceramics (exaggerating about …<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[50],"tags":[3032,3037,3040,3035,3034,3038,3036,3041,3039,3033],"class_list":["post-5285","post","type-post","status-publish","format-standard","hentry","category-penutup-lantai-dan-dinding","tag-ceramic-flooring","tag-ceramic-flooring-cost","tag-ceramic-flooring-for-kitchen","tag-ceramic-flooring-ideas","tag-ceramic-flooring-installation","tag-ceramic-flooring-installation-cost","tag-ceramic-flooring-looks-like-wood","tag-ceramic-flooring-lowes","tag-ceramic-flooring-that-looks-like-hardwood","tag-ceramic-flooring-tiles"],"_links":{"self":[{"href":"https:\/\/www.tneutron.net\/blogs\/wp-json\/wp\/v2\/posts\/5285","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.tneutron.net\/blogs\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.tneutron.net\/blogs\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.tneutron.net\/blogs\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.tneutron.net\/blogs\/wp-json\/wp\/v2\/comments?post=5285"}],"version-history":[{"count":1,"href":"https:\/\/www.tneutron.net\/blogs\/wp-json\/wp\/v2\/posts\/5285\/revisions"}],"predecessor-version":[{"id":8910,"href":"https:\/\/www.tneutron.net\/blogs\/wp-json\/wp\/v2\/posts\/5285\/revisions\/8910"}],"wp:attachment":[{"href":"https:\/\/www.tneutron.net\/blogs\/wp-json\/wp\/v2\/media?parent=5285"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.tneutron.net\/blogs\/wp-json\/wp\/v2\/categories?post=5285"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.tneutron.net\/blogs\/wp-json\/wp\/v2\/tags?post=5285"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
\nThis will make the ceramics become more elastic and at the time of installation can be easily attached. Note the quality of the ceramics. If it ceramics kw 1 then there is no problem, but if he
\na 2 or 3 kw will be hard put to precision. For the tile grout should be loose because each tile has a difference of 0.2-0.5 mm. Until ceramics do not collide with each other.<\/p>\n
\nBilaskan cement which has been mixed with a little water to the bottom of the ceramic, it will make adhesion to ceramic mortar really sticky.<\/p>\n
\nMortar should be completely homogeneous or cement, sand and water had been stirred sehingg completely mixed with baiik and basic floor will be installed must be clean of gravel, stone or
\nwedge-wedge that will make ceramic cavity below.<\/p>\n
\nTap the newly installed tile and make sure nothing is hollow or the hollow base. Due to these circumstances will make a freelance ceramics at a later date. Check if
\nhave the same average height with threads drawn to determine the height of the floor.<\/p>\n
\nDo not install ocher cement or grout in ceramic side of the spot. Let the ceramic tiles that have been installed for 2 or 3 days. This will make the rest of the air that will settle out through
\nthe grout that has not been closed. After that just given cement grout and do not forget to clean the grout is still empty of debris buildup.<\/p>\n
\nSecure the newly installed ceramic area of passing people for 2-3 days. Do not let the ceramic tiles will sinkhole because the mortar underneath is still strong for burdened.<\/p>\n
\nCheck back all the ceramic tiles that have been installed with a hit or knock-knock with a stick on the surface of the ceramic tile, ceramic tile and then do the next one and so on. Make sure that installed under ceramic tile mortar filled all solid and hollow nothing. In an area the size of the installation of 3 x 3 m usually
\nThere are hollow ceramic 3-5. For the immediate loading and repeat the tile installation.<\/p>\n<\/div>\n
\n1) Use a plastic spacer<\/strong>
\nWays that are commonly used to determine \/ set the distance grout is with plastic spacers that are sold in stores ceramics. Its size varies, giving many options determining the width of the grout. The plastic spacer is placed next to (above), and the young can be removed and replaced. Its use is very flexible.<\/p>\n
\nAnother way to determine the width of the grout is to use a wooden marker. Grout width is marked with a pencil or the other. Use of this flexible manner once but in application may be difficult. Installation of ceramic wall mounted spikes typically used yarn stretched from one side to the next kesisi pemasnagan accuracy and uniformity of grout width<\/p>\n<\/div>\n","protected":false},"excerpt":{"rendered":"