" /> TN Elektro - Page 3 of 67 -

Relay Time Procrastinator

Time Delay is a time delay switch that is used as a tool control system. Terminal voltage source found in numbers 2-7, NO contacts on the terminals 1-3 and 6-8 and NC contacts are on terminal 1-4 and 5-8. Picture 5-13. Relations terminal relay delay time (TDR). Picture 5-14. The front of the relay delay time (TDR). Picture 5-15. Mode ...

Read More »

Bipolar Transistor Theory

A transistor is a component which is the main building of the development of electronics. Semiconductor devices are typically classified into two major divisions, namely: Juction Bipolar Transistors (BJT) or commonly called the A and Field Effect Transistor Transistor (FET). This chapter, and the next several chapters, will discuss the characteristics, configuration and use of transistors in electronic circuits. In ...

Read More »

Watt Meter Function

a. Direct Current Power Measurement Below is shown a picture of the wattmeter link for DC power measurement. Figure 48. The wattmeter linkage for DC power measurement Wattmeter is an instrument of electrical power meter which is a combination of voltmeter and ampermeter. Direct current power measurements can be made using the Wattmeter gauge. In this instrument there are two ...

Read More »

Basic Theory Transformer

The transformer (transformer) is an electric appliance / electronics which serves to move the energy (power) power from input to output or from the primary side to the secondary side. The transfer of power from the primary to the secondary is accompanied by a voltage change either up or down. There are two types of step-up transformer that is transformer ...

Read More »

Energy Converter Tool

Some of which we will discuss are the tools that convert electrical energy into other forms of energy. This is important given the amount of electricity consumption in the unit during operation, depending on how many devices are used, for example when the unit works at night with all the lights on and the air conditioner also works with the ...

Read More »

Bias Transistors

As shown in Figure below, transistors have two junctions, one between the emitter and the base, called the Base Diodes – emitter, and the other between the collector and the base, called the Base Diodes – Collector. Since each diode has 2 possible bias, the bias Manu (forward biased) and bias backwards (reverse biased), the transistor has 4 (four) the ...

Read More »