a.<\/strong><\/span> Diagram Moment<\/strong><\/span><\/p>\n Moment diagram is a picture or diagram that shows the magnitude of the moment in any place and made in accordance with the scale of the moment.<\/span> The scale of this moment adapted to the situation \/ circumstances papers widely available.<\/span> for example 1cm appeal of 100 Nm, which means that every length of 1 cm show the amount of torque of 100 Nm, to distinguish the direction of moments then for the moment with the direction of the direction of clockwise is called the positive moments and vice versa moment opposite direction to clockwise called negative moment ,<\/span><\/p>\n The moment diagram can be seen in the following figure.<\/span><\/p>\n Figure 6.2 Diagram of torque on the shaft<\/span><\/p>\n When the rod AB of length L at the end of A at the free-flops and the other end is not in the fulcrum, at the end of the F B is loaded vertically downwards then the end will arise A shear force and bending moment.<\/span> The magnitude of the bending moment in accordance with the magnitude of the load F and the distance.<\/span> From drawing 6.2 magnitude bending moment at each of each point is as follows:<\/span> b.<\/strong><\/span> Diagram Style Slide<\/strong><\/span> Figure 6.5 Diagram of shear<\/span><\/p>\n c.<\/strong><\/span> Combined Diagram Moment And Style Slide<\/strong><\/span> Table 6. 2 Moment and Style Slide<\/span><\/p>\n
<\/a><\/p>\n
\n o Moment at point B is MB = Fx0 = 0.<\/span>
\n o Moment at point C, namely MX1 = F.X1.<\/span>
\n o Moment at point D ie MX2 = F.X2.<\/span>
\n o Moment at point E, namely MX3 = F.X3.<\/span>
\n o Moment at point F is MX4 = F.X4.<\/span>
\n o Moment at point G is MX5 = F.X5.<\/span>
\n o The moment at point A is MX6 = F.X6.<\/span> = FXL.<\/span><\/p>\n
\n Shear force diagrams are also called force field latitude of images that show the amount of shear force that works in any place along the stems get shear loads.<\/span> The shear force given the symbol Dx.<\/span> If the shear forces unmarked ppositif upward direction and if the downward direction of the shear force is negative.<\/span>
\n At loading on the stem AB, getting shear load of 500 N For local AB or 0 <x <6m Dx = 500 N. See the following page images,<\/span><\/p>\n
<\/a><\/p>\n
\n<\/strong> Moment diagram and shear force diagrams are usually drawn in a single drawing or combined, and for ease of calculation normally used tables as shown in the following table.<\/span><\/p>\n