Bus is a collection of lines connecting the above three components.<\/span> Buses can be analogized as a public road in front of our house we can pass if the neighbors were heading home, office, etc.<\/span> The difference is, in a general way at any given time there can be a lot of people or vehicles to pass through.<\/span> while for the bus, at one time there can be only one state (binary) for each track.<\/span> In other words, there are many components connected to the bus, but only a component that will fill the bus at a time.<\/span><\/p>\n The bus in the computer system is divided into 3 groups, let us consider the third bus to work:<\/span> Data bus (data bus), which is used for the passage of data to and from each component in the data atas.Bus have a certain size, for example 8, 16, or 32 lanes.<\/span> This measure should not be the same as the size of the data in each memory location.<\/span> For example, if the memory size is 8 bits, then the 32-bit data bus will be able to move 4 the data (write \/ read four memory locations) at once.<\/span> Data bus width is usually used as a classification microprocessor.<\/span> Eg microprocessor 8 bit, 16 bit, or 32-bit, meaning she has a data bus width of 8, 16 or 32.<\/span><\/p>\n Microprocessor data bus showed the ability to distribute a number of data at once.<\/span> Mikroposesor 8 bits or 1 byte, the hardware consists of 8 buses (D7MSB … D0LSB).<\/span> The data can be distributed simultaneously started (00000000 s \/ d 11111111) (B) or (00 s \/ d FF) (H).<\/span><\/p>\n
\n a.<\/span> The data bus carries information to and from the processor element.<\/span> The data bus carries instructions dimabil of memory, input data from input devices, data is stored into the memory, and outputs the data into the output device.<\/span><\/p>\n