(1) Button shellac<\/strong><\/span> Losses user button – shellac<\/u><\/span> (2) Bees wax<\/strong><\/span> For angles – angles that are difficult to reach using a scraper can stick quirk, then sanded scars and fine sandpaper.<\/span> Keep in mind not to happen beeswax on the surface of the workpiece around the hole.<\/span> Beeswax is not used on raw wood, because wood stain can not enter wax, if the case will result in stains on the surface of the wood.<\/span> We recommend the use of beeswax do after the first coat French polish, beeswax can also be done during the process of polishing bodyingfrench.<\/span><\/p>\n Beeswax can be given at the time of matching color.<\/span> To get the same color with beeswax workpiece can be colored on sat melt.<\/span> Please note the color of dried Beeswax younger than when they become a paste.<\/span> Staining of beeswax with ocher and a little oil growing – plants (linceed oil) stirred up properly evenly.<\/span> Losses usage of beeswax:<\/u><\/span> (3) Terven wax<\/strong><\/span> Losses terven use wax:<\/u><\/span> (1) Button shellac Button shellac flatiron heated premises or directly dibakardengan flame, after the melt is dripped onto the hole is then pressed with a finger. Within a few minutes after the dry residual shellac button scraped with a sharp chisel so flush with the surface of the workpiece. Button shellac suitable partner for the …<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1812],"tags":[2555,2562,2560,2557,2559,2558,2556,2563,2564,2561],"class_list":["post-1881","post","type-post","status-publish","format-standard","hentry","category-english","tag-application-materials","tag-application-materials-for-csulb","tag-application-materials-for-famu","tag-application-materials-for-harvard","tag-application-materials-for-ohio-state-university","tag-application-materials-for-texas-au0026m","tag-application-materials-for-ucla","tag-application-materials-for-university-of-alabama","tag-application-materials-for-university-of-florida","tag-application-materials-for-usc"],"_links":{"self":[{"href":"https:\/\/www.tneutron.net\/seni\/wp-json\/wp\/v2\/posts\/1881","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.tneutron.net\/seni\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.tneutron.net\/seni\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.tneutron.net\/seni\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.tneutron.net\/seni\/wp-json\/wp\/v2\/comments?post=1881"}],"version-history":[{"count":1,"href":"https:\/\/www.tneutron.net\/seni\/wp-json\/wp\/v2\/posts\/1881\/revisions"}],"predecessor-version":[{"id":3297,"href":"https:\/\/www.tneutron.net\/seni\/wp-json\/wp\/v2\/posts\/1881\/revisions\/3297"}],"wp:attachment":[{"href":"https:\/\/www.tneutron.net\/seni\/wp-json\/wp\/v2\/media?parent=1881"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.tneutron.net\/seni\/wp-json\/wp\/v2\/categories?post=1881"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.tneutron.net\/seni\/wp-json\/wp\/v2\/tags?post=1881"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
\n<\/strong> Button shellac flatiron heated premises or directly dibakardengan flame, after the melt is dripped onto the hole is then pressed with a finger.<\/span> Within a few minutes after the dry residual shellac button scraped with a sharp chisel so flush with the surface of the workpiece.<\/span> Button shellac suitable partner for the relatively small hole.<\/span>
\n An advantage of using shellac Button:<\/u><\/span>
\n<\/u> \uf0a7 – Fast user \/ usage<\/span>
\n \uf0a7 – The rest – the rest can be cleaned<\/span>
\n \uf0a7 – hardness is sufficiently reliable<\/span>
\n \uf0a7 – Can be used for hand corner<\/span>
\n \uf0a7 – Safe on the job when finishing with lacquer<\/span>
\n \uf0a7 – Only for small jobs relatife<\/span><\/p>\n
\n \uf0a7 – It takes a special skill in using shellac button.<\/span>
\n \uf0a7 – Color button shellac will give the impression of a darker color on French polish finish, fading button shellac unstable because the operator determined.<\/span>
\n \uf0a7 – Easily broken or regas if it has cooled due to shrinkage.<\/span><\/p>\n
\n Beeswax is used for holes – small holes, a larger hole and nail holes should wear other types of stopping.<\/span> Beeswax is not suitable for lacquer finishing.<\/span> Beeswax can be cut easily with a finger – the finger then heat in order to melt, its use can be done with a tool called a quirk stick.<\/span> To remove any remaining beeswax done using scraper flat to the surface of the workpiece.<\/span><\/p>\n
\n An advantage of using beeswax:<\/u><\/span>
\n<\/u> \uf0a7 – Easy to use<\/span>
\n \uf0a7 – Quick harden<\/span>
\n \uf0a7 – Can be softened and given pigment<\/span><\/p>\n
\n \uf0a7 – Containing oil<\/span>
\n \uf0a7 – Can not be used under lacquer finishing<\/span>
\n \uf0a7 – Refuse \/ resist the entry of wood stain to the wood<\/span>
\n \uf0a7 – Not suitable for hand corner of the workpiece<\/span>
\n \uf0a7 – Too lenak, should not be used for larger holes of the nail holes.<\/span>
\n \uf0a7 – Do not have a high adhesive force on shellac<\/span><\/p>\n
\n Terven malleable wax beeswax but suitable for under finishing lacquer or plastic.<\/span> Erven wax should not be used directly on wood, because the stain can not enter, can be colored when melted.<\/span>
\n An advantage of using wax terven:<\/u><\/span>
\n \uf0a7 – Easy to use.<\/span>
\n \uf0a7 – Can be colored according to the final color finishing.<\/span>
\n \uf0a7 – Suitable for small holes.<\/span><\/p>\n
\n \uf0a7 – Obstructing the entry into the wood stain.<\/span>
\n \uf0a7 – Suitable for hand corner of the workpiece.<\/span>
\n \uf0a7 – Suitable for small holes.<\/span><\/p>\n","protected":false},"excerpt":{"rendered":"