a) Examination of wood bending strength<\/strong><\/span>
\n Tools and materials required:<\/span>
\n o machine press \/ pull with equipment<\/span>
\n o Dial manometer<\/span>
\n o ruler measuring \/ roller meter<\/span>
\n o Wood with a size of 5 x 5 x 76 cm<\/span><\/p>\n

Inspection Method<\/span>
\n o Prepare equipment of the flexural strength at press machine<\/span>
\n o Put the timber on a machine with a distance of 70 cm pedestal.<\/span>
\n o Give the burden on the middle of the wood with a speed of 2.5 mm per minute with a deviation \u00b1 25%.<\/span>
\n o Note the loading and decrease deflection.<\/span>
\n o Read load (P) if the timber has suffered broken and not able to be burdened.<\/span>
\n o Hitng flexural strength by the formula 3 PL \/ 2BH\u00b2, where<\/span>
\n P = Load Fracture<\/span>
\n L = Distance Pedestal<\/span>
\n B = Width Test Objects<\/span>
\n H = High Test Objects<\/span>
\n<\/a><\/p>\n

b) Examination of Courage Press Parallel Wood Fiber<\/strong><\/span>
\n<\/strong> Tools and materials required:<\/span>
\n – Press machine with equipment<\/span>
\n – Timber size of 5 x 5 x 20 cm<\/span>
\n Inspection Method<\/span>
\n – The breadth of the field of press timber (5 x 5 cm) F<\/span>
\n – Put the test objects on a machine press<\/span>
\n<\/a><\/p>\n

– Imposition is done continuously at the velocity of 0.008 cm long each test sample per minute.<\/span>
\n – Reading of the load (P) and the deformation is done until it reaches a maximum.<\/span>
\n – Calculate the firmness of wood fibers parallel press<\/span>
\n<\/a><\/p>\n

c) Determination Examination Perpendiculars Fiber<\/strong><\/span>
\n Tools and materials required:<\/span>
\n – Press machines with supplies<\/span>
\n – Ruler measuring \/ roller meter<\/span>
\n – Iron slab 5 x 5 cm with a thickness of 5 mm<\/span>
\n – Timber size 5 x 5 x 15 cm<\/span>
\n Investigation Method:<\/span>
\n – The test object is placed on the machine planers<\/span>
\n – Put the plates 5 x 5 cm with a thickness of 5 mm above the test specimen is right in the middle.<\/span>
\n – Charges pressed continuously, at a speed of 0.3 mm per minute, so the burden will work through the iron plate on wood radial field.<\/span>
\n – Charges pressed against the specimen until urgent 2.5 mm iron plate.<\/span>
\n – Determine the compressive strength perpendicular to the fiber.<\/span>
\n<\/a><\/p>\n

d) Examination Strong Pull Perpendiculars Fiber<\/strong><\/span>
\n Tools and materials required:<\/span>
\n – Engine drag<\/span>
\n – Drill with \u00d8 2,5 cm<\/span>
\n – Saws<\/span>
\n – Wood with a size of 4 x 5 x 6 cm<\/span>
\n Investigation Method:<\/span>
\n – Place the specimen in the tensile tool in a tight squeeze on the tensile machine.<\/span>
\n – Load is given continuously at a speed of 0.25 cm per minute.<\/span>
\n – Test results are seen to rupture load (P) kg<\/span>
\n – Calculate the perpendicular fiber tensile firmness<\/span><\/p>\n

e) Examination of Parallel Fiber Pull Strength<\/strong><\/span>
\n Tools and materials needed<\/span>
\n – Tensile machine and equipment<\/span>
\n – Saws<\/span>
\n – Sculpture wood<\/span>
\n – Wood as in the picture<\/span>
\n Inspection Method<\/span>
\n – The test object enter the machine pull clamp<\/span>
\n – The specimens were withdrawn continuously at a speed of 0.25 cm per minute<\/span>
\n – Objects drawn up broke and kekuatannta (P)<\/span><\/p>\n","protected":false},"excerpt":{"rendered":"

a) Examination of wood bending strength Tools and materials required: o machine press \/ pull with equipment o Dial manometer o ruler measuring \/ roller meter o Wood with a size of 5 x 5 x 76 cm Inspection Method o Prepare equipment of the flexural strength at press machine o Put the timber on …<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1812],"tags":[1000,1005,1002,1001,1003,1010,1009,1004,1006,1008,1007],"class_list":["post-740","post","type-post","status-publish","format-standard","hentry","category-english","tag-mechanical-wood","tag-mechanical-wood-planer","tag-mechanical-wood-projects","tag-mechanical-wood-splitter","tag-mechanical-wood-toys","tag-mechanical-wood-watch","tag-mechanical-wooden-clock","tag-mechanical-wooden-clock-kit","tag-mechanical-wooden-keyboard","tag-mechanical-wooden-puzzles","tag-mechanical-wooden-table"],"_links":{"self":[{"href":"https:\/\/www.tneutron.net\/seni\/wp-json\/wp\/v2\/posts\/740","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.tneutron.net\/seni\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.tneutron.net\/seni\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.tneutron.net\/seni\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.tneutron.net\/seni\/wp-json\/wp\/v2\/comments?post=740"}],"version-history":[{"count":1,"href":"https:\/\/www.tneutron.net\/seni\/wp-json\/wp\/v2\/posts\/740\/revisions"}],"predecessor-version":[{"id":3267,"href":"https:\/\/www.tneutron.net\/seni\/wp-json\/wp\/v2\/posts\/740\/revisions\/3267"}],"wp:attachment":[{"href":"https:\/\/www.tneutron.net\/seni\/wp-json\/wp\/v2\/media?parent=740"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.tneutron.net\/seni\/wp-json\/wp\/v2\/categories?post=740"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.tneutron.net\/seni\/wp-json\/wp\/v2\/tags?post=740"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}