Tools and materials required:<\/span>
\n – Press machine<\/span>
\n – Iron hemispherical steel in the hollow area of \u200b\u200b1 cm2 (\u00d8 1.13 cm)<\/span>
\n – Ruler measuring<\/span>
\n – Wooden size of 5 x 5 x 15 cm<\/span>
\n Investigation Method:<\/span>
\n – Prepare a test piece with a size of 5 x 5 x 15 cm<\/span>
\n – Put the specimen on a machine press<\/span>
\n – Samples tean with steel ball \u00d8 1.13 cm to the ball as deep as \u00bd x diameter<\/span>
\n – Testing of violence committed against both field \/ end and fourth field side.<\/span>
\n – Calculate the load of the field testing of the figures obtained average hardness of the end of the radial and tangential.<\/span>
\n<\/a><\/p>\n

a.<\/strong><\/span> Firmness examination Slide Wood<\/strong><\/span>
\n<\/strong> Tools and materials required:<\/span>
\n – Press machines and equipment<\/span>
\n – Saws<\/span>
\n – Wooden size of 3 x 4 x 8 cm<\/span>
\n Investigation Method:<\/span>
\n – Prepare the test specimen as in the picture<\/span>
\n – Place the specimen on the brace sought not to objects slide field continuously with a speed of 0.6 mm \/ min<\/span>
\n – Record the timber when the load shifted<\/span>
\n – Calculate the firmness of sliding parallel to the wood fibers<\/span>
\n<\/a><\/p>\n

b.<\/strong><\/span> Shopping Firmness parallel examination Fiber<\/strong><\/span>
\n<\/strong> Tools and materials used<\/span>
\n – Engine drag and perlengkpannya<\/span>
\n – Drill \u00d8 2,5 cm<\/span>
\n – Saws<\/span>
\n – Ruler measuring<\/span>
\n – Wood 4 x 5 x 9.5 cm<\/span>
\n Investigation Method:<\/span>
\n – Prepare a test object such as a picture<\/span>
\n – The specimens were put on a tensile machine<\/span>
\n – Run the tensile machine with a speed of 2.5 mm per minute<\/span>
\n – The result is flawed p kg if bend test split<\/span><\/p>\n

c.<\/strong><\/span> Examination Density<\/strong><\/span>
\n Tools and materials required:<\/span>
\n – Oven<\/span>
\n – Scales the nearest 0.1 gram<\/span>
\n – Saws<\/span>
\n – Gauge \/ meter<\/span>
\n – Wood with a size of 5 x 5 x 5 cm<\/span>
\n Investigation Method:<\/span>
\n – Prepare the specimen with ukuran5 x 5 x 5 cm<\/span>
\n – Determination of the density of the test specimen has kadarair 15% and dry air<\/span>
\n – The test specimen is weighed for example (a gram)<\/span>
\n – Volume is measured by immersion method<\/span>
\n \uf0b7 Fill water in a measuring cup (.xml)<\/span>
\n \uf0b7 The specimens were soaked first few minutes<\/span>
\n \uf0b7 Put the specimen into a measuring cup containing water<\/span>
\n \uf0b7 After the specimen into the measuring cup, the water will rise to (Y ml)<\/span>
\n \uf0b7 The volume of the test object can be searched is Y minus X ml ml<\/span><\/p>\n

Calculate the density of the wood by the formula:<\/span>
\n<\/a><\/p>\n

<\/a><\/p>\n

d.<\/strong><\/span> Radial and Tangential Shrinkage examination<\/strong><\/span>
\n Tools and materials required:<\/span>
\n – Ruler sliding (sigmat)<\/span>
\n – Saws<\/span>
\n – Oven<\/span>
\n – Wood with a size of 2.5 x 2.5 x 20 cm<\/span>
\n Inspection Method<\/span>
\n – Prepare a test piece with a size of 5 x 5 x 5 cm in a clean state<\/span>
\n – The test specimen is weighed example A gram<\/span>
\n – The specimens were dried in an oven at a temperature of 103 \u00b1 2 \u00b0 C to constant weight<\/span>
\n – After that the test specimen is weighed example B g<\/span>
\n – The percentage of moisture content of wood can be calculated<\/span><\/p>\n","protected":false},"excerpt":{"rendered":"

Tools and materials required: – Press machine – Iron hemispherical steel in the hollow area of \u200b\u200b1 cm2 (\u00d8 1.13 cm) – Ruler measuring – Wooden size of 5 x 5 x 15 cm Investigation Method: – Prepare a test piece with a size of 5 x 5 x 15 cm – Put the specimen …<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1812],"tags":[1020,1019,1011,1021,1018,1012,1014,1016,1013,1017,1015],"class_list":["post-742","post","type-post","status-publish","format-standard","hentry","category-english","tag-driver-examination-woodstock-on","tag-driver-examination-woodstock-ontario","tag-examination-wood","tag-medical-examination-woodlands","tag-wood-examination-table","tag-wood-lamp-examination","tag-wooden-examination-couch","tag-wooden-examination-couch-uk","tag-wooden-examination-table","tag-woodwork-examination","tag-woodwork-examination-papers"],"_links":{"self":[{"href":"https:\/\/www.tneutron.net\/seni\/wp-json\/wp\/v2\/posts\/742","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.tneutron.net\/seni\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.tneutron.net\/seni\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.tneutron.net\/seni\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.tneutron.net\/seni\/wp-json\/wp\/v2\/comments?post=742"}],"version-history":[{"count":1,"href":"https:\/\/www.tneutron.net\/seni\/wp-json\/wp\/v2\/posts\/742\/revisions"}],"predecessor-version":[{"id":3253,"href":"https:\/\/www.tneutron.net\/seni\/wp-json\/wp\/v2\/posts\/742\/revisions\/3253"}],"wp:attachment":[{"href":"https:\/\/www.tneutron.net\/seni\/wp-json\/wp\/v2\/media?parent=742"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.tneutron.net\/seni\/wp-json\/wp\/v2\/categories?post=742"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.tneutron.net\/seni\/wp-json\/wp\/v2\/tags?post=742"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}