Map printing is reported as the mapping process is done.<\/span> The map can be printed on several media and sizes, using a printer or plotter.<\/span> Map printing process begins with setting up the printer \/ plotter that will be prepared including the setting up of paper and installing drivers.<\/span> Map printing steps are as follows:<\/span> 2) Connect the printer \/ plotter with a USB cable, serial or network<\/span> 7) Setting the paper roll on the paper roll buffer<\/span> 8) Setting the buffer in an available slot<\/span> 9) Load the paper roll on the plotter<\/span> 10) Select the type of paper used<\/span>
\n 1) Assemble printer \/ plotter according to instructions manuals<\/span>
\n
<\/a>
\n Picture 46. Assemble plotter<\/span><\/p>\n
\n 3) Installing the printer driver, either using the driver CD or files downloaded from the website of the manufacturer of printer \/ plotter.<\/span>
\n 4) Setting paper on the printer \/ plotter.<\/span> Sheet paper feeder is placed on the front while the paper roll is placed on the rear feeder plotter with the following steps:<\/span>
\n 5) Turn on the printer<\/span>
\n 6) Select the roller as a paper source<\/span>
\n
<\/a>
\n Picture 48. Select a paper source<\/span><\/p>\n
\n
<\/a>
\n 49. Picture setting up the paper roller<\/span><\/p>\n
\n
<\/a>
\n 50. Picture setting up buffer<\/span><\/p>\n
\n
<\/a>
\n Picture 51. Load paper<\/span><\/p>\n
\n 11) Select the size of paper used<\/span>
\n 12) Print a map either directly or indirectly<\/span>
\n 13) Printing directly from ArcMap is done by using the command File -> Print<\/span>
\n
<\/a>
\n Picture 54. Print map<\/span><\/p>\n