The cast Printing Process
1 Prepare the mold that has been dried, then unite and use a rubber belt.
2 Prepare the clay slip, before use using a hand mixer to stir into homgen.
3 Pour the clay slip into the mold to fill, do repeatedly until it reaches the desired thickness of the object. Pour forth from the clay slip into the mold, then place the mold upside down so that the remains of clay slip can flow.
4 Remove the rubber binder, open the plaster mold when objects printouts can already be released.
5. Take a printout of ceramic objects and then trim them and then puree the connection object surface using a wet sponge.
6 Wind-aired ceramic objects are then dried until ready to be burned biscuits.
