1) The use of working with the right tools.
If we can use the tools work properly, then in carrying out the work will gain the following benefits;
Please note that in order to carry out a great job with just wearing a simple tool has not efficient anymore. Example:
a) To carry out the cable connection to a substation control which number in the hundreds of cable channels, then stripping the cable with a knife will require a very long time, because it must use cable stripper pliers.
b) For the installation of a label that is embedded in the house with a very large volume of work, the cable channel excavation using conventional tools such as hoes, spades or crowbar course, the result is very inefficient. To overcome this, the excavation must wear a large-capacity scraper tool (eg using Back Hoe).
c) Installation of power transformers with power tens of megawatts needed help tow truck and trailer with lift tens of tons.
Note that in carrying out the project / work in Indonesia, many tools that work fast is broken, it is because the user, do not know how to use or reckless wearer, as well as maintenance procedures that less attention.
Example:
a) Make a big hole in the metal plate using an electric drill with a small drill bit to drill-making wiggle eyes, this will damage the electric drill machine.
b) Measure the flow of a large electric load using Ampere Meter having a small current capacity will damage the appliance.
3) The ability to use the instruments of labor.
Considering the price of the equipment is relatively expensive, and sometimes had to be ordered from abroad and require considerable time, if the device is damaged and can not be used, to disrupt the work. Therefore, the ability of people who use these tools must be thoroughly trained adequately.
To use the tool specialized labor, where the required accuracy and complicated, eg: search for ground cable fault location using the Wheatstone Bridge, the potential users should be trained in advance on how to use these tools.
The important thing to note, the working tool in the field should be managed well, especially on large projects, where working tools to be managed by the manager of the material (Material Controller) and regulator working tool (Tool Kipp) from ordering, receipt of goods, the use of and out of the warehouse and maintenance of the working tool.
To overcome the above, workers in electrical engineering should be able to use the tool properly, as well as in maintain it.