LOGIC: Provide definite boundaries of a state, so that a state can not be in two conditions at once. In the logic of the rule known as follows: – A state can not be in both right and wrong at the same time – Each one is right / wrong. – A condition called true when it ...
Read More »Voltage Pull and Press
In discussing the tensile strength can not be separated from the stress and strain. Both of these properties were measured during a tensile or pressure. In the pull, strain is the length of the material, while the press is pemendekkan of material are pressed. Results of the stress and strain if the share will yield a Young’s modulus (E). Young ...
Read More »Resultant Vector of Mechanics
A number of forces acting on a structure can be reduced to a single resultant force, then this concept can assist in simplifying problem. Calculate the resultant force depends on the amount and direction of the gayagaya. Some way or method to calculate the resultant force, namely: 1. Method force vector addition and subtraction. 2. The method of triangular and ...
Read More »General Requirements Sensors and Transducers
In selecting equipment sensors and transducers are appropriate and in accordance with the system to be censored is necessary to note the general requirements of the following sensors: (D Sharon, et al, 1982) a. linearity There are many sensors that generate output signals that vary continuously in response to the continuously changing inputs. For example, a heat sensor can generate ...
Read More »Type Sensors and Transducers
The development of sensors and transducers very quickly according to the progress of automation technology, increasingly complex an automated system is built, the more types of sensors are used. Robotics is as an example of a complex automation system, sensors are used here can be categorized into two types of sensors, namely: a. Internal sensor, the sensor mounted on the ...
Read More »Method Quine – Mc. Cluskey
To simplify the logic equations of four variables, Kmap is the most effective method. But if the equation was more than four variables this method will have trouble. Method Quine Mc. Cluskey adalh one possible way to simplify a logical expression of more than four variables. Here are the steps; When given the logic equation F = Σ (0,3,7,8,9,13) a. ...
Read More »