Pondasi dan Dinding

As the name implies the partition wall is devoted to the bulkhead between spaces. Because the design of the bulkhead between one space and another, this wall has a more practical design and construction of lighter construction than the other walls. Materials of this type of wall partition to include a good and cheap. Unfortunately this wall can not be ...

The walls are a very important part of building a role for building construction. Wall forming and protects the contents of the building in terms of both construction and artistic appearance of the building. Judging from the raw materials used, the walls of the building can be divided into: 1. Bata print / lime brick, artificial stone is made from ...

Work measurement and leveling the field (Uitzet) is a type of work that is used to realize the plan shape of the building to be a building on ground locations that have been provided. Work will be on-site measurements of the building in accordance with the building plans. The results of these measurements in the form of straight lines which ...

Mortar is an equal part masonry with stone masonry itself. Mortar unit serves to cushion the stone pair, that supports full one another. Digesters provide sealing between the units to prevent water and wind. Glue mortar units are tied to each other to be a monolithic structural unit and are also important for the appearance of masonry walls. The most ...

The foundation is a basic element vital buildings, building construction serves as a buffer on it. The strength and robustness of a building construction is highly dependent on the construction of the foundation. Construction of the foundation of a building must meet the following requirements: 1. Shape and construction must demonstrate a solid construction and strong to support the load ...

Board expected masonry work (Bouwplank) is a body of work consisting of pairs boards. The pair intended to place the points of measurement results required in setting up a building and forming a flat surface. In order to produce the shape of the building in accordance with the planning, installation guessed board must meet the following requirements: 1. His position ...