Accident Prevention and Health Problems
So that no accidents and health problems it is necessary to act as follows:
a) The entire workplace must be maintained at all times from dirt
b) All workplaces free of other items that interfere with the work / passers
c) Any equipment / machine ready for use anytime
d) Equipment carrier / lifter must be in good condition
e) Appliances (wood or aluminum) must be in a state ready and safe to use
f) Every workplace should be contained telephone numbers that are relevant to aid in an accident such as:
– Doctor
– Hospital
– Police
– Firefighters
– Ambulance
g) first-aid equipment is ready to use and easy to reach
h) Work causing a fire like the welding, grinding and others, should be placed away from the presence of materials that easily catch fire
i) Each room must be free to self-rescue (evacuation)
j) Each rotating machine parts must be well protected
k) Nails and the like must be inserted / bent.
Efforts in Engineering Workshop
a) Always use goggles / protective security
b) Use smock while practices in the workspace
c) At the time of grinding check the rest of the length of the grinding wheel
d) As soon replaced when there is a pair of grinding wheels are not balan / unbalanced and uneven surface
e) Clean up immediately after finishing work on the machine
f) Make sure the drill bit in the correct state and likewise installed hard material to be drilled
g) Trying always in a state of good body position during work
h) Protect your nose and mouth while being painting
i) When the plate is being cut with a chisel on a vise (vice) point to the wall
j) Keep us from the face of the exhaust gas flow
k) Do not remove debris by hand chisel head
l) Do not use water in case of fire coming from the electrical
m) Disconnect one battery cable on the vehicle while it is being worked
Efforts Maintenance Work
Things that are necessary for the prevention of damage and accidents are:
n) that includes security measures, prevention, vibration, dust and danger of rust
o) Effective Lubrication is a general guarantee of a machine
p) maintenance workshop that has to do with the planning and scheduling of maintenance
q) Examination regular
r) Determination of engine maintenance schedule
s) Provision of tools
Repairs carried out if:
t) Product ineligible
u) Stand / pads is not solid, loose
v) The sound of the engine showed irregularities
Repair procedures reached by road:
a) Examination of the work that has to do with thoroughness
b) Demolition, damaged parts manufactured or repaired / replaced with new ones
c) Installation, adjustment while held research whether the elements of the machine is functioning properly
d) Measurement, intended adjustment dimendional either no-load or load power
e) The position of the engine mounting (examined with water fitting)
