English

1. etcher What is meant by etching is the depiction of the cultivation pattern of lines on the workpiece to be worked out. As a guideline for the inclusion of cultivation used size working drawings. So that the line can be seen clearly etching, the workpiece rough spiked with lime basting liquid (pure lime mixed with water and glue) or ...

Hydraulic equipment using liquid heat resistance, but when using hydraulic equipment should always be kept out of the hot temperature conditions as will cause bursting. Examples sourced hydraulic equipment are: A. Jack Hydraulic (Hidrolic Jack) Hydraulic jack is a hydraulic equipment to remove parts of the vehicle, such as vehicle left wheel or the rear wheel of the vehicle. Figure ...

When doing work for the purpose of maintenance or repair work piece, there are some things that must be considered: a. Maintenance and repairs are carried out according to the procedures of SOP (Standard Operating Procedure), manual / work instructions as appropriate. Standard Operating Procedures issued by perusaah that make and sell goods / product is usually included when procuring ...

a. Balanced Vane (Pump Fan balanced) This pump uses the pump house inside elliptical and there are two entry holes (inlet) and two drain holes outlet whose position opposing directions. Created so that radial pressure of hydraulic fluid negate each other so that there was a balance (balanced) Vane (fan) that looks like the image 8b mounted on the shaft ...

A. Magnitude In the field of measurement technology is a routine activity undertaken by the technocrats to measure a wide range of systems, products and machine elements. As exemplarily: measure the diameter and length of an axis, measuring the temperature of the steam from a boiler, measure the time it takes to process a product, measures the force required to ...

Terms requisite balance For components that have a style similar to the catch point different directions, for example the loading contained in knot or a knot connection order, style style said to be balanced or objects at rest / static if: – The amount of force on the X axis = zero (ΣX = 0); – The amount of force ...