With regard to work using machine tools / power tools, workers must pay attention to safety measures such as wearing protective goggles, rubber gloves to protect from possible electrical voltage shock. The workplace must be kept clean and dry to prevent accidents due to slipping. Machine tools / power tools to be attached protective glass and there is a safety switch.
Fatal accidents can occur while working with machine tools / power tools improperly. Type of machine tools / power tools are tools that work using power source: electric, pneumatic, and hydraulic. Common things that must be considered when using the machine tools / power tools:
Do not carry the appliance by holding the cable or the hose.
Do not unplug the cable or hose when removing from the place / container.
Keep hoses and cables from heat, oil and sharp parts.
Remove the connection to the power source if the appliance is not in use, before cleaning and repair, or when replacing accessories (such as drill bits / knife).
Keep a safe distance with other people or other objects when working.
Secure work with clamps or a vise, frees both hands from holding the workpiece while operating the tool.
The escape crash when the initial operate. Do not put a finger on the switch when plugging the tool in a power source.
Keep sharpness and hygiene equipment to get maximum work.
Follow the instructions manuals to lubricate and replace accessories.
Ensure the robustness of the holder and rotating balance when operating the machine tools / power tools.
Do not wear jewelery, bracelets, rings, necklaces, watches to avoid accidental snagging moving objects.
Use goggles and other safety fittings.
If any damaged equipment mark with the words “BAD – DO NOT USE”
Do not use the machine tools / power tools to rain.
Do not use the machine tools / power tools in an environment that there is no gas or flammable materials.
Keep away from children
Do not force the work equipment.
Make sure the vents open tool free to ensure cooling of the inside of the equipment.
Do not even touch the moving parts.
Do not clean plastic body machine tools / power tool with oil / cleaner.
When replacing parts make sure the specifications are the same as the old components.