" /> TN Seni | Page 4 of 44 |

Stages of Engineering Polish

a) Closing Pori with Filler / Wood tilling in The surface of the wood is more dense and solid evenly, then the wood pores whitewash / closed with filler. Filler can be made of a white wall or a pumice stone, but results in less good tilling wood, to produce tilling in the best wood, it is recommended to use ...

Read More »

Function Wood Filler

Wood filler serves as a filler pores or holes in the wood. Wood filler that both must meet the following requirements: a. Can fill the pores with a good, dry quickly, easily sanded, and can absorb the color or coating material finisihing on it properly. Judging dri diluent wood filler material can be classified to:  – Wood Filler is ...

Read More »

Preparation Techniques Polish

a. Preparation Shellac Polish Polish usually prepared by mixing shellac and methylated spirits in a ratio of 1 kg shellac: 4.5 liter ms. For the purposes of which little can be mixed between 125 grams – 225 grams: 1 liter of spirits. Mixing 1: 45 is quite thick which is usually done on the job at hand. Mixing should be ...

Read More »

Application Materials Stoping

(1) Button shellac Button shellac flatiron heated premises or directly dibakardengan flame, after the melt is dripped onto the hole is then pressed with a finger. Within a few minutes after the dry residual shellac button scraped with a sharp chisel so flush with the surface of the workpiece. Button shellac suitable partner for the relatively small hole. An advantage ...

Read More »

Bahan Timber Stoping

a) Peralatan dan bahan stoping tradisional (1) Bahan – bahan yang diperlukan :  – Lilin / wax (sebagai pengikat) : 1 bagian  – Singkut atau tepung dempul (sebagai pengisi) : 1 bagian  – Arpus / gondorukem (sebagai pengeras) : secukupnya  – Pewarna (bermacam – macam warna dari tepung oker) secukupnya atau sesuai dengan warna yang dikehendaki. ...

Read More »

Mengenal Bahan Melamik

1. Melamine dan Nitro Selulose System Finishing merupakan tahapan pengerjaan terakhir yang sangat penting dan menentukan. Pemilihan bahan finishing yang tepat dan diimbangi dengan cara pengerjaan yang benar akan menghasilkan pekerjaan yang bermutu dan bernilai tambah yang tinggi. Tujuan finishing adalah untuk mencapai sasaran peningkatan mutu yang unik dan nilai tambah barang//hasil produksi. Selulose nitrate, atau lebih dikenal dengan nitroselulose, ...

Read More »