a) Equipment and materials of traditional stoping
(1) material – material needed:
– Candle / wax (as binder): 1 part
– Singkut or putty flour (filler): 1 part
– Lacquers / gondorukem (as hardener): to taste
– Dyes (wide – range of colors of ocher powder) to taste or according to the desired color.
(2) Equipment used:
– Containers putty made of metal for heating a mixture of putty.
– Spoon putty (or use a spatula).
(3) Step Pembuatannya:
– Heat the wax and lacquers on the container which has been prepared on the stove to melt and mix – that stir the mixture evenly.
– Enter putty flour into the mixture while stirring – so stir evenly mixed (homogeneous).
– Enter the coloring (ocher) a little – gradually, stirring – stir until you get the desired color.
– putty is ready to be used while still in warm
b) putty manufacturer
Putty manufacturer is putty made by Fabric finishing materials, types and diverse kamasananyapun inisesuai things to the needs and knowledge of the plant to increase the economic value and market reach, as for the type of putty that there dipasaan are:
(1) ordinary wood putty
(2) Wooden Putty
(3) Putty Plastics
c) Equipment and materials fillering
– To fill the pores to be seen in contrast, used a special filler. This filler can be made by buying wood pulp pore filler that can be dissolved or diluted with thinner. Choose a light color, for example camphor wood filler color or the color of teak wood filler. Select soluble dye thinner, dark color or other colors in accordance with the selection. Mix into a slurry filler color of youth, we have prepared earlier. Expected dye our earlier choice can appear in contrast with the main background color.
– The hole in the workpiece surface such as nail holes, knots and damage to the side of the corner, should be capped before the stain implemented. Many types of materials used to it, that in general all iti called stopping. Operators should be familiar with the characteristics of each type of stopping material that will be used for the kinds of finishing, do not let an error that is fatal in the end finishing.
Stopping material often used is:
– Button shellac
– Bees wax
– Terven wak
– Lacquer wak
– Fibre glass