English

Basic gate OR is equivalent to two open switch mounted parallel / row as shown in Figure 6 below. The circuit consists of two switches mounted in parallel, a relay and lamp. Lights up when one or two switches A and B are connected (on). Otherwise light will be extinguished only when all the switches A and B disconnected (off). ...

a. General requirements of the control system. Each control system must be stable. This is a key requirement. In addition to the absolute stability, a stability control system should mempuyai relatively decent. A control system must also be able to reduce the error to zero or to arrive at a price that can be tolerated. b. Basic issues in the ...

In the electronic control system, the controller used is a unit consisting of electronic components. Here is a series of electronic unit that is integrated from many electronics components, namely resistors, capacitors, inductors, diodes, transistors, op-amp, IC and many other electronic components. The electronics unit, could be a series of simple or complex circuits. One of the electronic components that ...

Overall the survey shows that the application of electronics is happening in the industry suggests that the development of digital techniques happen very quickly. There are many reasons why this could happen, but only two reasons in this section are important. One is the reduction of the uncertainty, related information encoded digitally compared to the analog information. For the record ...

The number system (number system) is a way to represent the magnitude of a physical item. The number system that is widely used by humans is biilangan decimal system, ie sisitem number that using 10 kinds of symbols to represent a quantity. This system is widely used because humans have ten fingers to be able to assist calculations. As with ...

In the selection and use of a sensor, the necessary considerations, so as expected. Considerations include: 1. Identification of the actual signal. This stage includes the nominal value and the sensor measurement range, the physical condition of the environment where the measurement is made, the required measurement speed, and others. 2. Identify the required output signal. Most of the output ...