" /> TN Industri | Page 5 of 43 |

Basic Control System

In the industry, the manufacturing process has a number of objectives to obtain results that will satisfy the demands of accuracy and cost effectiveness. Humans have the ability to perform tasks in a broad scope, including decision-making. Some tasks such as taking things and running from one place to another, often dikerjakandengan the usual way. In certain circumstances, some of ...

Read More »

Prinsip Disain Sistem Kendali

a. Persyaratan umum sistem kendali. Setiap sistem kendali harus bersifat stabil. Ini merupakan persyaratan utama. Di samping kestabilan mutlak, suatu sistem kendali harus mempuyai kestabilan relatif yang layak. Suatu sistem kendali juga harus mampu memperkecil kesalahan sampai nol atau sampai pada suatu harga yang dapat ditoleransi. b. Persoalan dasar dalam disain sistem kendali. Pada kondisi praktis, selalu ada beberapa gangguan ...

Read More »

Automatic Control Systems

Automatic control system is a feedback control system with reference to the desired input or output can be constant or change slowly over time and its main task is to maintain the actual output is at the desired value by the disruption. Figure 2.7 Water Level Control System Automatically The use of automatic control systems in all fields of engineering ...

Read More »

Speed ​​Control System

Car steering As a simple example of an open control system, may be seen in Figure 2.11, which controls the steering wheel. Direction of the two front wheels can be considered a controlled variable or the output (y) direction of the steering wheel is driving or input signal (u). Car steering control system is still using mechanical systems, because the ...

Read More »

Usage Control System

1 Speed ​​Control System Governor Watt basic principle of Watt’s governor engine with the schematic diagram illustrated in Figure 9.8. The magnitude of the rate of flow of fuel into the engine cylinders arranged in accordance with the difference between desired engine speed and actual engine speeds. Governor speed set according to the desired speed. The actual speed drops below ...

Read More »

Control System General

In the study of engineering, we need to define additional terms are necessary to describe control systems, such as: plant, disturbances, feedback control, and a feedback control system. The following will be given definitions. Then a description of the system is a closed loop and open loop, and also the advantages and shortcomings compared to the open loop control system ...

Read More »