" /> English Archives - Page 8 of 17 - TN Mesin
Home > English (page 8)

English

Add Style By Way Painting

If there are two forces that have captured the same point a different direction with the direction of the force makes an angle α the resultant number can be calculated by the following equation: Figure 2.23 Two styles with different directions For α = 90 ° then Cos α = 0 or apply the formula of Pythagoras, namely: Description : ...

Read More »

Usability and functionality Rele

For the purposes of the distribution of power to the load with a higher current, the manufacturer has improved the ability of current-carrying relay contacts to reach hundreds of amperes. Rele which has a large current-carrying capability of this, commonly known as a contactor. Figure 2.13 shows the construction of the contactor. Figure 2.13 Type Contactors Contactors designed specifically for ...

Read More »

The Importance of Treatment Machine

Each object is left without a touch of care can be damaged due to contamination or other causes. With good care tools, objects / items and the system is always under control and ready for use at any time. With this treatment efforts in addition to convince the goods ready for use will extend the life of equipment, product or ...

Read More »

Moments and Balance

a. Moment In many tool engineering tool that can be used to alleviate or help with the work, for example, open a nut or bolt, to unlock the nut or bolt that is the way play it and like where if the rotating nut or bolt is done with bare hands? Weight is not it! So easy to open a ...

Read More »

Removing the Bucket Cylinder

WARNING ! At the operating temperature, the hydraulic tank is hot and under pressure. Hot oil can cause burns. To prevent possible injury, remove pressure in the hydraulic impulse circuit ( boom, stick, bucket, swing ), travel line, and oil fill cap in the hydraulic tank before all channels or hydraulic components are removed. Remove the oil tank cap when ...

Read More »

Ruler or Term Sorong

Measurement accuracy is needed in designing a device. Kekurangtelitian often make such a device is not functioning optimally or even function at all. Examples of the screws that will be used have a diameter of not the same as his partner, although the difference of 0.01 mm, the two can not be assembled properly. If the screw component is installed ...

Read More »