English

1. Use suitable lifting apparatus to place the bucket cylinder (4) in place . It weighs about 660 kg (1450 lb) for H-Family Bucket and 885 kg (1950 lb) for the J-Family Bucket . Figure 3.32 Step 1 2. Use suitable lifting apparatus to place the assembly pin (7) in place. Use the appropriate Cap Driver Pin and hammer to ...

Note: Check all O-ring seals and components of wear or damage. Replace components if possible. Put a little lubrication on all O-ring seals with a lubricant suitable for sealing perfection when installed. Clean all components with cloth / tissue so that it is free from any contaminant. 1. If the cover assembly (11) has been removed, give the sealent (12) ...

1. Open the access door on the right side of the machine . Figure 3.37 Step 1 2. Clean the area around the filter , especially on the filter base (where the filter is attached). Figure 3.38 Step 2 3. Remove the filter from the filter base using a strap wrench filter by rotating it (note the direction of play) ...

First remove the pump from the equipment to be repaired. Use the pump disassembly procedure from the manufacturer. Use appropriate equipment and adhere to safety procedures as confirmed by the manufacturer. Figure 3.47 Attach the pump to the demolition or table for disassembly (the pivot part is below) (Figure 3.47 left). With sharp metal scratching apparatus, a pencil or magic ...

To add a style that has more than two styles with the same capture point and different direction can be determined by painting the poles, the way is as follows: Create a painting style components in accordance with the direction and magnitude of force that have been scaled; Create a polar point O on the right side of the composition ...

Each object is left without a touch of care can be damaged due to contamination or other causes. With good care tools, objects / items and the system is always under control and ready for use at any time. With this treatment efforts in addition to convince the goods ready for use will extend the life of equipment, product or ...