English

Measurement accuracy is needed in designing a device. Kekurangtelitian often make such a device is not functioning optimally or even function at all. Examples of the screws that will be used have a diameter of not the same as his partner, although the difference of 0.01 mm, the two can not be assembled properly. If the screw component is installed ...

Develop or add styles that have more force than the two styles with the same capture point the way can be described by the following figure: In preparation for painting style of drawing tools necessary tool especially crossbar triangular one pair and stationery or engineering techniques using pencil and ruler triangle one pair of which is to create a line ...

If a cross-section has an area A cm 2 with the distance of the center of gravity Z to the axis line xx and measuring y and the axis of the axis yy size x the moment static to the axis xx and the axis xx is: Mx = Ay (cm 3), and a moment of static the axis yy ...

1. The quantity and unit of length Long magnitude has units of meters with the symbol (m). According to the approval of the General Conference des Poid et Mesures / CGPM 11th 1963. The long-distance meter is a unit that is 1,650,763.73 times the wavelength in vacuum of the radiation krypton-86 atom. Figure 1.2 length measuring instrument 2. The quantity ...

Unplanned maintenance is the kind of maintenance that is done abruptly because of a tool or equipment will be used. It often happens that the new equipment is used until it breaks without any treatment means, and then do repairs if you want to use. In the instrument maintenance management, the manner known to unplanned or emergency maintenance (emergency maintenance). ...

Terms of balance to the force components that have the same capture point to different directions, is o The amount of force on the X axis = zero (ΣX = 0); o The amount of force on the Y axis = zero. (ΣY = 0). As for the style of a style that has a different fishing spot, where the ...