Log splitting process is a series of initial steps that determine the supply of wood raw material for the production process in the next timber. Cleavage log normally use a large band saw machines are bandsaw. With this machine can produce splitting logs into boards or sheets bars beam according to the needs or size of the wood raw material is desired.
The following figure shows a piece of the log in the process of using a bandsaw division in the vertical direction or the vertical and horizontal direction or horizontal.
Fig. Cleavage process Log
Fig. Cleavage process logs into Wood Beams
The picture above shows the results sawing logs into beams that great according to specific needs.
Sawing Results
In planning division logs, we should pay attention to the third direction in order to form a wood shrinkage papanpapan sawn correctly, so get papanpapan in accordance with needs.
Fig. Sawn boards
Planks of wood sawing logs the results can be grouped as follows:
Flat sawn timber (boards tangential)
Quarter sawn timber (boards radial)