Construction Framework Carcases

Carcase Construction Framework (Frame carcase) simple, shaped like a skeleton in the form of a series of box frame consists of a pole (stiles) and threshold (rails). If the frame is coupled with the carcase threshold configuration, poles and muntins in various positions, then frames carcase is already not simple anymore. As the top flap carcase (Top carcase) can be used plywood (plywood), hardboard or MDF, then glued and clamped, at the top of the carcase.

Cross the threshold of prisoners drawer, and connected screws (shelves) is a complementary part of the construction of the box frame (frames carcase), which often can not be ignored in the planning, because of the existence of a drawer on this construction will add functionality carcase.

Carcase Construction picture frame, the old model (skeleton exposed)

a. Carcase construction paneled
Construction design is very flexible, you can do so in accordance with the purposes and designation. One characteristic of the paneled construction Carcase is that on both ends of the carcase, right side and left side of carcase construction is made of solid boards, instead of trusses. Then between the upper threshold and lower threshold front, usually mounted a threshold that his position could be close to the upper threshold, or close to the lower threshold, or even in the midst, dependent than the threshold amount that will be installed and function than the thresholds installed.

Carcase top part can be made from wood massive (solid timber), blockboard, corestock massive (solid), multiplex, or particle board (Partcle board) and “planted” on a framework so as to ensure safe and strong.
A = Construction Solid carcase
B = Construction Carcse paneled the inside

b. Massive construction Carcase (Solid End Carcase).
Construction Carcase massive are other types of construction Carcase, this construction is largely or even even entire construction components made of planks solid, which meant the board solid is able to wooden planks massive, plywood (multi-plex) / panel processed (manufactured boards) , bockboard, corestock or particle board (particle boards), the upper threshold and lower threshold made of massive wood slats.

Construction Carcase massive, comprising: left and right side (Solid Ends), leaves the top panel (Solid Top), Alas bottom of solid wood (Bottom Solid), and are usually equipped with Plint, Tundan (Shelves), Door, Drawers, and the back cover.

Image Application Carcase Massive Construction

Image Application of Solid Construction Carcase with Walking Frame

Konstrksi Carcase solid, made in order to fulfill the purposes of storage of goods / accessories are relatively large, and protected for a long time, so that the carcase should be made of materials that width, thickness uniform, dense and does not shrink or swell too extreme. Therefore, the right material is used for this type of construction is solid panel board manufacturing (manufacturing boards).

Figure Plan sideboard comprised of Solid Construction Carcase
The material to be used is manufacturing the boards

c. construction Box
Which included the construction type group this box is a box container, special carcase construction, construction purposes crates and drawer construction. Forms and types of components depending on the function and purpose of the construction.

Image Design Construction Box with variations Column

Construction of Forming and Bending
This construction consists of a set of parts, verge, poles, and other components made of solid wood (solid) or laminate is bent and / or formatted / formed for the design of furniture, for example a seat / backrest chair with curved shapes.