a. Preparation Shellac Polish
Polish usually prepared by mixing shellac and methylated spirits in a ratio of 1 kg shellac: 4.5 liter ms. For the purposes of which little can be mixed between 125 grams – 225 grams: 1 liter of spirits. Mixing 1: 45 is quite thick which is usually done on the job at hand. Mixing should be done in a place made of ceramic or glass / glass, to avoid evaporation, the place should be closed and airtight. Polish stored in bottles often attached to the mouth of the bottle because whenever pouring will be left to him, so that the bottle cap is opened and should be hard to break down the lid.
b. Filtering Dough Camphor
Often filtering camphor primarily for purposes vanish high quality results. Camphor or filtered with filter paper (paper screem) similar, are not allowed to wear newspaper or similar paper because of the color of the paper will contaminate the color of camphor.
Camphor is made of orange shellac, and white shellac difficult screened because it contains wax, for it is done by heating so that the wax melts and floats on the surface of camphor to be filtered.
c. Points Camphor
Camphor stored in the container / container metal will quickly darkens due to corrosion, it is advisable to store it in bottles or containers made of glass / plastic.
d. Humidity Effects on Camphor
Humidity will affect vanish because spiritus (temperature cold enough) akanmenarik moisture from the air which is quite large so be berjamurpada polished workpiece. Therefore, it must be planned warm enough work space with mounted space heater. To avoid milk flower / mildew on the surface of the workpiece, then the camphor need diambah 5% butyl celiosolve.
Flowers milk / fungus that occurs on the surface of the workpiece can be removed with a damp menggosokkanrubber dipped in rubbing alcohol, so that the workpiece surface becomes moist and releases moisture in the surface. At the time of the process vanish, if the humidity is very high to do well to warm the container storing container camphor camphor is close to the stove electricity with a certain distance.
e. Brush Camphor
There are several kinds of brushes / makeup tools needed to laburan camphor. diantaanya:
– Mop: various sizes required for coloring and coating
– Blender: for resurfacing (coating) in the broad measure
– Pencil brushes: for repair and coating / Tusir
– Stain Brushes: flat brushes of various sizes for staining.
– Dusting Brushes: kuasuntuk clean the workpiece, brushes
– is not to be in contact with the oil.
– Dulling Brushes: Like shoe brush to make the polishing surface becomes matte finish.
f. Polishing Cloth (Polishing Rubber)
A very important tool for applying varnish on the surface of the workpiece is a polishing cloth / rubber. The use of rubber requires a greater skills to get good quality work, fast, precise, and efficient, and shiny results. Burnisher professional has three kinds of rubber stored in a place / container airtight.
– In-in skinning process used new rubber.
– In the process of bodying-up used rubber which has been used in the process of skinning-in.
– In the process of stiffening worn-out rubber that has been used in the process of skinning-in, new or used rubber used pross bodying-up is not used for stiffening-out process.
g. Material for Making Rubber
Materials for making rubber are generally made of cotton wool and cotton fabric size of 20 cm x 20 cm square. The cotton fabric is made / dibntuk as shown in lampian 1, rubber is very good for skinning-in process. Cotton wool squeezed – squeezed and wrapped in cotton cloth or flannel, large and small rubber depending on usage.
h. storage Rubber
Rubber is used for finishing camphor does not always wear the new rubber, rubber that long would be great to wear, with rubber records are stored properly. How rubber storage by placing it in a place / container is airtight so that conditions remain moist and distinguished as its place in accordance with the usefulness of the rubber.