Managing Theodolite Topcon Tools Tl -6 DE
1. Attach the stand in accordance with the height of the gauge and exploit the stand head as flat as possible.
2. Replace the air above the stand and lock it with screws under the stand head.
3. While looking – looking through the center point of two leg loops the stand is removed and while moving closer to the point of being in the circle center point, then both the stand plugged into the ground.
4. Set nivo box using the adjusting screws flat or couplers A, B, and C so that the bubble is in the middle of the circle.
5. Looking back through the center point is a point out of the circle center point, if the shift then unlock aircraft parts or screws under the heads of the stand, and then shift the aircraft to the point of being back in the circle center point, and then using screws A, B, C explores nivo tube.
6. While looking into binoculars, screwing eyepiece so that the cross thread seems obvious.
7. Read the horizontal angle.
a. Point the binoculars to a point P, then screwing the diaphragm until the target was clear.
b. By using smooth driving horizontal and vertical smooth mover vertical cross thread align with the target point P.
c. Open window light mirrors, looking magnifier reading corner and then rotate the micrometer or drum so that the strip lines on a scale to be truly middle of the two strips under the numbers minute, this figure shows the minutes in decades, while the number minutes and seconds can be read on the small box below scale degrees and minutes (tens). For details, can see in the image reading nook in the corner reading magnifier on the following page. Readings above is regular reading (reading lop position on the right corner of binoculars).
d. For extraordinary reading, binoculars reversed and rotated clockwise and navigate back to point P.
e. By using a screw driver of smooth horizontal and vertical smooth mover Align vertical cross thread with a target at the point P.
f. In the same way with the usual reading corner will produce exceptional readings, where both readings odds 180 0.
g. The average reading results are: regular reading with an incredible plus, minus 180 0 then divided by two.
8. Read the vertical angle
a. Measure the aircraft’s high readings amid signs measuring yarn.
b. Point the binoculars at the figure as high as signs measuring plane
c. Reading reading reading reading the same way by being flat angle to the degree seen in the upper or the letter V, and units of minutes and seconds at the bottom of the box.
d. For outstanding reading binoculars reversed and rotated and directed to the original signs, and Darri regular reading will menghasil extraordinary reading.
e. Reading ordinary and extraordinary if summed result 360 0 (for TL 6DE)
f. Eg ordinary and extraordinary reading
