1 Determine the line for the models to determine the parts of the plaster mold and define the hole foundry for pouring the slip clay. Do it right in order to avoid bearing on the time of printing. 2 Make the backing on the model animals using clay plastic according to the ...
Read More »Bentuk Benda Keramik
The cast Printing Process
1 Prepare the mold that has been dried, then unite and use a rubber belt. 2 Prepare the clay slip, before use using a hand mixer to stir into homgen. 3 Pour the clay slip into the mold to fill, do repeatedly until it reaches the desired thickness of the object. Pour forth from the clay slip into ...
Read More »Formation Technique Pour Print
Lathe Formation with this technique is done by creating a three-dimensional model of revolution symmetrical or lathe techniques. The difference in these two models on the materials used if the model results were made using clay round plastic playing techniques are models made of plaster lathe turner. Advantages models use a cast material shrinkage is not a model and the ...
Read More »Formation Process
Jigger-Jolley manual tool can be directly used to form ceramic objects when catakan casts and profile has been provided, if casts and profile are not yet available it needs to make models and molds of plaster material and then create the profile, after the completion of a new form of ceramic objects. The process of formation of ceramic objects form ...
Read More »Jigger Machine Part-Jolley
The parts of the machine jigger-Jolley be drawn as shown below snippet. Figure 8:51. Jigger parts. Figure 8:52. Jolley parts Specification: Pivot, the axis of the tool holder (rod handle). Stop, bolts regulator that can go up and down which serves to set the blade forming cessation (profile). Tool holder, rod holder grip the knife forming (profile) that ...
Read More »Gypsum Mold Making Process
Making plaster mold of the free formation models require precision in dividing the model so that objects produced from the plaster mold can be opened easily (no matter which part of mengkait. Plaster mold making process is done in the following way: 1 Bring a model with tapered top and bottom, mark a line on the model to determine the ...
Read More »