Figure drawing technique is generally much used by following certain rules. Engineering drawings are working drawings that are universal that have the same meaning wherever, so that the working drawings can be read and understood by the person who made it.
Figure technique is often referred to as working drawings or drawings of production which aim to translate the image into an image scalable design that can be understood by implementers or part of production or to realize the idea or ideas in the making of an object or product. Buklanlah engineering drawings drawings made by the manufacturer of personal tastes and like to paint, but the picture is a drawing technique that must follow certain rules and methods.
Working drawings will guide a person who will make the object or product, both in terms of size, material, color, texture, final completion (finishing), and others. Some of the tools and materials used in engineering drawing are as follows:
1. Desk image
In general, a drawing table is made of wood that has a table leaf and smooth, this table can be set in accordance slope consumer
Pencil used to have different series based violence marked with the letters H, B, and F, or a combination of these letters.
- Potlot series H (hard) which means hard, the greater the number will be even harder.
- Potlot series B (black), which means black, has a soft nature, the larger the number the software.
- HB pencil series and F (firm), have moderate nature (not hard and not soft) being the series F has properties similar to the HB pencil drawing techniques used in pencils series H (H-3H) was used to design a series of B (B -2B)
There are several types of rule used in engineering drawings, a pair of triangular ruler and measuring ruler, both have numeric sizes (centimeters and inches). The first ruler triangle with angles 90, 30, and 60, while the second triangle with angles 90, 45, and 45. Ruler triangle is used to draw a straight line, especially the vertical line and make shrinkage, being a measuring ruler used to measure the length, not to draw the line.
3. Term
Term is unity. This term is used to create a line of circles, meggambar angle, measure the length of a line, the line dividing the circle and divide.
Pens pen or similar device having a tubular round pen, rapidograf has a serial number that is easily recognizable color, serial number indicates the size of the hole rapido pipe or thick lines generated. The serial number from 0.1-0.9, 0.1 serial number produces a line thickness of 1 mm, was 0.5 serial number generate 0.5 mm thick. Rapidograf can be recharged with special inks and are available in a variety of colors.
5. Sablon
Screen printing is a printing tool letters, numbers, and certain shapes (triangle, square to four, circle, ellipse, etc..) Is used to create letters, numbers, and shapes are organized and neat. Sablon-shaped hole lubsang. Have a variety of sizes to suit the user
In general, the size of the
paper is divided into 2 two, namely:
A size paper (A0-A10) which is the size of the paper so it is used as a basic measure
Paper size B (B0-B10) is the size of the paper before it is cut. Paper size in mm: A0 (841×1189), A1 (594×841), A2 (420×594), A3 (297×420), A4 (210×297), A5 (148×210), A6 (105×148)