Adjustable Wrench is designed to be used to install the existing release with the size of the bolt or nut varies with the tool, used for general work. Not suitable for a particular job. Size can be adjusted according to the size of the bolt / nut up to its maximum limit. Adjustable Wrench has a 15-degree angle to the handle with a mouth width size between 13 mm – 35 mm.
There is also a 45-degree angle to the handle with a mouth width size between 26 mm – 83 mm.
Image Adjustable Wrench
How to use by rotating the adjusting jaw, while the mouth was placed on kepla lock bolts / nuts and lock mouth set according to the size of the bolt / nut. Direction of rotation toward the jaw can be shifted as shown below.
Pictures Direction of use Adjustable Wrench
Several types of pliers are as follows:
a. combination pliers
Tang combination is a tool that can be used to clamp the workpiece, bending and cutting wire and many other needs.
Pictures Tang Combination
b. Tang pinch
Tang pinch has a tapered tip resembling a crocodile snout. Used to hold small objects.
Pictures Needle nose Pliers
c. Cutting pliers
Cutting pliers used to cut small metals such as wires, cables and others.
Pictures Tang Cut
There are various kinds of tang-tang berpeda other needs, such as:
a. Circlip Pliers to remove the lock ring.
b. Universal Pliers, to clamp pipes with size that can be set.