" /> TN Sipil - Page 15 of 44 -

Dimensi Batang Pohon

Diameter atau keliling merupakan salah satu dimensi batang (pohon) yang sangat menentukan luas penampang lintang batang pohon saat berdiri atau berupa kayu bulat. Bahkan berlanjut hingga ke volume batang pohon berdiri maupun yang telah ditebang. Untuk memberikan pemahaman yang lebih dalam mengenai diameter dari suatu lingkaran, di bawah ini terdapat gambar diameter dan lingkaran. Dari Gambar 1 dapat dipelajari mengenai ...

Read More »

Alat-alat Pelindung Anggota Badan

image_thumb.png

Badan kita terdiri dari beberapa bagian. Semuanya itu harus terlindung sewaktu melaksanakan pekerjaan. Alat-alat pelindung badan tersebut adalah sebagai berikut : a. Pelindung mata Mata harus terlindung dari panas, sinar yang menyilaukan dan juga dari debu. Kelangkapan lengsa untuk pengelasan dengan gas dan untuk melakukan pemotongan jangan dibiasakan dipakai untuk pengelesan lengkung atau busur karena lensa untuk mengelas lengkung telah ...

Read More »

Relief At Hurt

a. The cause of injury The wound is cut off from the network by something causes. Among the causes of liver injury caused by: 1) Contact with blunt object  Blisters  Bruising  Torn 2) Contact with sharp objects  Tusuk  Iris  jab 3) burns as a result of:  Fire  Steam Heat  Liquid Heat ...

Read More »

High Trees by Position

a) The position of the eye is located between the base and the top of the stem, but the direction is not parallel to the viewfinder flat / directions viewfinder decreased (Figure 29). From the images could be obtained high trees formula, namely: T = (t1 + t2) T = (Sn x tangent α) + (Sn x tangent β) T ...

Read More »

Units of Measurement Systems

Ash’ari et al. (2012) divides the system unit of measure commonly used in the world into two groups of units of measurement systems, namely: (a) Systems UK (British Imperial System). For the length expressed in units yard. The standard length of 1 yard based on the rule of Brins (Bronzebar) with a temperature of 600 Fahrenheit. Ruler is stored in ...

Read More »

On the Protection Tools and Electrical Engineering

The layout of the main dangers when using the machines are on: a. Part of gears b. Wheel belt c. Rotating parts Avoid limbs because unconsciously touched on the possibility of moving machine parts. This touch often cause accidents. Gears permanently closed should be sought to keep curious hands that cause injury to people or damage to the machine. Figure ...

Read More »