English

The reservoir should accommodate a liquid free from air bubbles into the suction tube. All hoses enter and leave the tank below the liquid level. The drain hose must have at least 3 feet of flexible hose larger than the tap that goes into the frame of the pump or motor. Pipes shall be isolated from structures made of rubber, ...

Hygiene is a key way of ensuring the life span, whether for a new unit or an improved unit. Cleaning of parts by using solvent and dried in the air is considered adequate, assuming that the liquid used is clean. Meanwhile, for equipment that requires precision, its internal mechanism must be free of chemicals and particulate contamination. SPECIAL ATTENTION AND ...

Starting with: Attach body retaining pin by raising the dump body . Then enter the body retaining pin in place, ie on the left and right side of the machine. Figure 3.14 Pin holder dump body WARNING ! At the operating temperature, the hydraulic tank is hot and under pressure. Hot oil can cause burns. To prevent possible injury, remove ...

a. Moment of Inertia Against Horizontal axis (XX) Moment of inertia of the cross section to a line that is the number of cross-sectional area (element) multiplied by the square of the smallest normal distance to the EAM, or cross-sectional area multiplied by the square of the distance. If the cross-sectional area is the smallest elements DA1, DA2, dA3 …. ...

There are several kinds, among others: a. Pressure Relief Valve This valve serves to limit the maximum working pressure in the system (safety). If there is more pressure out-let valve will open and the fluid pressure is discharged into the tank. So the pressure of fluid flowing into the system remains secure. This valve can also function as a sequence ...

Here below is how to use the Open-ended spanner true:  bolts are still tight should not be loosened with a wrench. Wrench only to bolt loose. If forced, the wrench will be broken ends or the head of the bolt into the round.  The size of the head bolts, wrenches longar will lead angle bolt head is damaged, ...