English

A circuit (circuit) and Network (net work) is formed from a combination of the two terminal elements of both passive and active elements element. Active elements is a source of voltage or current source capable of delivering energy to the circuit or network. Being passive elements are resistors, inductors and capacitors are circuit elements that absorb or store energy from ...

Series circuit is closely related to a series of control applied in refrigeration and ventilation systems. The control circuit is an electrical circuit that can control the electrical load in a system. If all the control devices are connected in series, then opening a contact switch or other control device that is in the circuit will open the circuit and ...

Transient current occurs because the capacitor takes time to meet him with the charge and the reverse also occurs in the process of emptying himself of the charge. There are two processes that occur in the capacitor in the RC circuit, the charging and discharging cargo. Suppose the capacitor initially using a battery, fully charged by the charge then the ...

Mesh current method (mesh) and the node voltage expressed by Kirchoff is the most main of direct current circuit analysis with passive element resistor (resistive circuits). However, by calculating the equivalent resistance of the branches of the series and parallel combined with the rules of the voltage divider circuit current division pad series and parallel circuits could provide another way ...

All cargo configuration having an electric potential energy U specifics. This energy is equal to the work W to be done to collect the charges of each component, which initially was considered a not to each other and at rest. Let’s review the process of charging and discharging the capacitor. Work must be done to separate the two charges equal ...

This theory is generally used specifically to analyze the communication network. The overall efficiency of the network hired a maximum power to each branch is 50%. Therefore, the application of this theory for power transmission and distribution network is very limited. Where expected on the transmission and distribution network is a high efficiency rather than the transfer of maximum power. ...