a) Type Coating
Coating materials that will be used to laminate composed of various materials derived from wood and processed products derived from synthetic materials as well as manufactured. The type of coating material to laminate derived from wood and its products which include finir, teak wood, plywood, multiplex and the like. There is also a synthetic coating material production factory building materials or furniture, usually shaped like a formica sheets among other things, reconsheet, finil, aluminum foil, and the like.
How to Cut Coating
How to cut sheathing materials adapted to the characteristics and uses of equipment or machinery. For the coating material derived from wood and processed like finir, teak wood, plywood, multiplex and the like can be cut using hand tools or machines.
Hand tools used to cut the sheathing can use various saws, among other triplex saws, saws backs, and the like depending on the characteristics of the coating material tersebut.Apabila coating material is cut using the machine, then the machine can be used circular saws Bermeja or the like according to the characteristics of the engine coating materials that will be done.
b) MengerjakanProses Laminate Wood
(1) Hardware Laminates
Equipment for gluing or lamination can be grouped into two kinds, namely the equipment laminate using hand tools and equipment that uses a laminate press machine (press).
Press machine (press) is very effective to do the work of laminate a sheet width up to the width of the size of the plywood. Emphasis is generated by this machine is evenly distributed throughout the surface area of the workpiece.
(2) Preparation Process Laminates
Preparation work or glueing wood laminates require some preparation to be done so that the results obtained can well and as expected. Equipment gluing or lamination using hand tools include equipment clamp, a place or a bottle of glue, tools for applying glue that spatula, klos / logs as the protector of the workpiece. Equipment clamp or clamps for laminate there are various, among others, is F clamps, clamping rod, clamping frame, clamping side and clamp the corner.
The picture above shows the gluing trim on the sheet workpiece clamping equipment mengg unakan form side clamps. Clamps this side is very effective to clamp gluing lis on the side of the sheet, because it has an emphasis on two directions, namely horizontal direction or vertical direction. What things need to be prepared for the lamination process include:
(A) Plan time for the lamination process.
(B) Selecting the type of adhesive materials according to function.
(C) Preparing the materials to be used.
(D) Preparing and checking equipment to be used.
(E) Adjust the workplace to the lamination process.